[nutter4x4]

[nutter4x4]

Good old 01e gearbox and s4 rear diff

• This reply was modified 7 years, 9 months ago by nutter4x4.

[nutter4x4]

Yes I am, with R32 lump with a small compressor type snail

[nutter4x4]

I’m at a point where I’m pretty sure it’s going to work, subframe built with steering rack in place, driveshafts fitted, tunnel in place, gear shifter cut and welded to the right length, loads of clearance for selection, now to strip it all back and finish welding it,

[nutter4x4]

[nutter4x4]

https://www.flickr.com/photos/151827696@N07/shares/PC1B21

Attachments:

1. 

   31993701324_9ccb64921e_o.jpg
   

2. 

   32713067111_efbf64560d_o.jpg
   

[nutter4x4]

Struggling to to post pics from my phone doh

[nutter4x4]

[nutter4x4]

If you look inside the vr6 box I’m sure you’ll find it’s a bolt in diff, i swapped to a vr6 diff when I changed to the haldex rear diff to use the skoda transfer box

[nutter4x4]

Blimey over 2years this thread and it’s still not been mapped

• This reply was modified 7 years, 10 months ago by nutter4x4.

[nutter4x4]

just by pass it at the ignition, itll be the black wire cut into the thick red wire on the ignition switch,

https://www.youtube.com/watch?v=nXoPEmh39ls cut the blue wire []

[nutter4x4]

3dr or 5dr?

[nutter4x4]

could always get a carpet made up and fitted, i had mine made up the guy used really deep thick carpet used in porsches

[nutter4x4]

ive heard its now going to be the r420, also a 3litre vr6 24v twin turbo on the cards too

[nutter4x4]

im pretty sure i know someone with a 6spd set up already but its not quiafe,if your interested could save you some cash,
just to let you know i broke the main shaft in my quaife box and they are really noisy,

[Author]

Posts