Forum Replies Created
-
AuthorPosts
-
Chris S
ModeratorWell you are not going to get one of them in the UK as the G3 Syncro was never imported!
Chris S
ModeratorThe Syncro box is 02C, & you will need the Diesel version of the gearbox (CTT) or the ratios will be to short
There is 1 of them here
Chris S
Moderatorquote:
Originally posted by Hungry_Horse_1955Bad news[
] They fixed the bearing, but it turns out the reason it failed is due to the transfer box being b*ggered. We’d noticed when we changed the clutch last year that the transfer box had been repaired at some time and the internals must have been damaged and have finally given up the ghost[
!]
Also the bearing mountings had gone but they can’t get a replacement bush. Does anyone know if they are still available somewhere?
Which bush do you mean?
btw I have a transfer box here if you need one?
Chris S
ModeratorI have found some AUDI inner rubber bushes for a 25mm dia ARB Part number is 893 411 327E
But I don’t know if the outside is the same pattern as the correct bush
Chris S
Moderatorhttp://www.ebay.de/itm/POWERFLEX-SAAB-9000-ANTI-ROLL-BAR-BUSH-PFF66-102-19-/220834089454
Says that these are 19mm bore while we want 25mm bore prothane or 23mm bore rubber.
Chris S
ModeratorCould you not use copper pipe of a suitable diameter?
if it stands brake line pressure which is tons per square inch it will stand a couple of bar fuel pressure easily,
you could even use brakeline connection fittings to keep it fueltight.
Chris S
ModeratorYes they will, but you may have to get a bit creative with your handbrake cable
Chris S
ModeratorNot according to ETKA.
Chris S
ModeratorIt is a very tidy looking Syncro
Chris S
Moderatorquote:
Originally posted by CokkeliI just realised that i love vw golf… all of them.
So its not only Syncronitis you have then? [
]
Mind you that is a very tidy 23/24 year old car! [
]
Chris S
ModeratorEngine console (mount) is P/N 357 199 354J – this part is also fitted to the manual (not automatic) 2WD VR6 as well – I.E. Passat, Golf, Corrado, etc
Chris S
ModeratorChris S
ModeratorYou could ask rallye ronan as I got him a complete 25mm kit sometime in 2008 when they were still available from the dealers over here & I dont know whether he got around to fitting it.
Having looked, I see that he has not been on site since 2009 but you never know it just may be worth shouting him
.Chris S
ModeratorThe outer rubber bushes P/N 357511437A are available – as are the outer brackets P/N 357511433 – & even the inner brackets P/N 357511417
its only the inner rubbers which are nla [
]
Chris S
ModeratorI have checked & there are no longer any left here either
http://www.volkswagen-classic-parts.de/bestand/index_e.html
-
AuthorPosts