Chris S

Forum Replies Created

Viewing 15 posts - 481 through 495 (of 2,632 total)
  • Author
    Posts
  • in reply to: Cheap source for replacement propshaft boots #10621
    Chris S
    Moderator

    I have a few heat shields still available if anyone wants one?

    100_1314.jpg

    in reply to: Can you tell what it is yet? #10619
    Chris S
    Moderator

    I missed it this year, so its 2 days late! 11 years & counting. [:D]

    in reply to: Clutch options – g60 engine into syncro #10612
    Chris S
    Moderator

    To fit a cable change box you need a G60 flywheel & clutch.

    for a rod change box the clutch is smaller diameter.

    btw a 16v friction plate will not fit as the splines are different on the 8v (rodchange) gearbox input shaft.

    in reply to: No 4wd in reverse ? #10609
    Chris S
    Moderator

    I will look this evening for you.

    in reply to: Rallye gearbox help #10608
    Chris S
    Moderator

    Sorted & part on the way!

    in reply to: Corrado seat padding #10607
    Chris S
    Moderator

    I just heard back from my partsman & it is no longer available from VW anywhere in the world.

    in reply to: syncro to Haldex problem #10606
    Chris S
    Moderator

    How many bolts do you have bolting the mounting console to the block, 3 or 4?

    in reply to: Differential_AXR_Country #10602
    Chris S
    Moderator

    To be honest I have refitted them in this condition without any problems.

    in reply to: Differential_AXR_Country #10600
    Chris S
    Moderator

    Here is a brand new one

    http://www.volkswagen-classicparts.de/bestand/

    click on – ‘Zugang ohne vorherige Registrierung’ then –

    enter p/n 009409143C in upper box ‘Teilenummer’ – click finden

    then sit down in shock at how much they cost

    009 409 143 C Triebsatz Classic+ Teil 354.69 €

    Spare part is available in limited quantities

    in reply to: Differential_AXR_Country #10599
    Chris S
    Moderator

    it looks like there is damage to the bearing cage as well,

    what does the pinion look like?

    in reply to: Differential_AXR_Country #10597
    Chris S
    Moderator

    No unfortunately I don’t.

    I might have a standard pair (p/n 009 409 143 with a 67/15 tooth pattern) about somewhere though, not sure till I look.

    in reply to: Differential_AXR_Country #10595
    Chris S
    Moderator

    However, just wondered whether it is possible to use output shaft from AXR and crown wheel from diesel tranny.
    Any ideas whether that will work?

    Sorry but it wont work because the pinion & crown wheel gears are a matched pair, you cant even but them seperately from VW, only as a pair,

    btw do you have skype? you can e-mail me your skype adress.

    in reply to: Differential_AXR_Country #10593
    Chris S
    Moderator

    The 2 gears (Crown wheel & Pinion)are a matched pair and the AXR Country gearbox is the only box in the VW range to use a 68/14 tooth ratio, the std syncro uses p/n 009 409 143 with a 67/15 tooth pattern.

    you could fit a complete standard Golf Syncro gearbox, this will lower your revs slightly at speed & increase your fuel economy but other than thay you wont notice much difference.

    in reply to: Differential_AXR_Country #10591
    Chris S
    Moderator

    As you say you have acess to ETKA can you please post part numbers so we know we are talking about the same part(s)

    I think you mean part nr 009 409 143C can you confirm this please?

    in reply to: Corrado seat padding #10589
    Chris S
    Moderator

    I just emailed my partsman & am awaiting reply.

    meanwhile here is 1 on eBay

    http://www.ebay.co.uk/itm/400472026701?clk_rvr_id=614171664790&item=400472026701&lgeo=1&vectorid=229508

Viewing 15 posts - 481 through 495 (of 2,632 total)

V2 of the vwsyncro.co.uk forums

Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)