Forum Replies Created
-
AuthorPosts
-
Chris S
ModeratorNo, if you are using the G60 Syncro manifold & downpipe, then the non G60 front box will not fit.
As for the studs you can use either 8mm stud bar or VW stud p/n N 0445113 would probably work just as well.
the Gasket is available from http://www.volkswagen-classicparts.de/bestand/
Chris S
ModeratorExellent!
Chris S
ModeratorSorted & in the post(Direct)to you!
Chris S
ModeratorHow many brake pipes are there fitted to it, 3 or 4?
Chris S
ModeratorAre you 100% sure that is a Rallye propshaft?
Chris S
ModeratorNo problems, I can sort it for you!
I can get it sent here & then on to you or hopefully direct to you!
please let me know what you would like to do?
Chris S
ModeratorHere is another at almost the same price.
Chris S
ModeratorHere you go, a brand new one for not much money!
103 euros including postage [
]
Chris S
ModeratorGood question, I dont know!
Chris S
Moderatore-mail me please, btw the console in the picture is a Rallye/Passat G60 Syncro one.
Chris S
ModeratorHere are some more photos to try & show it better
Chris S
ModeratorIt fits between parts 19 ‘console’ & 23 ‘the rubber support’ & will raise that side of the engine by nearly 2 cms
Chris S
ModeratorI think 1 of these will help, it fits between p/n 357 199 354F the console & the rear engine mounting.
Chris S
ModeratorIf you fit the the 02C engine mountings it will all work.
Let me have a look in ETKA later.
Chris S
ModeratorGood Question! I don’t know, you may have to make a bridge piece.
-
AuthorPosts