Jetta GTX 16V………the Syncro conversion

Forums Project Cars (contains photos) Jetta GTX 16V………the Syncro conversion

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #1947

    I’ve had this Jetta for 17 years, I completely restored the exterior in 2012, that build thread is here: http://forums.vwvortex.com/showthread.php?5652224

    About a year ago I got a Passat W8 Sport 4motion and absolutely love it. I was going to sell the Jetta or give it to my younger brother but recently I started SCCA Solo Autocross and decided to build my Jetta to race instead of the Passat. The AWD of the Passat convinced me to Syncro the Jetta with a BBM/G60 for the 16V to come next. Basically the car will become like a Golf Limited but with a trunk.

    So, here we go, I bought a 1992 Passat Syncro in Canada for the drivetrain (everything is the same except the rear axle carrier mounts and the center driveshaft) and I bought a 1990 Golf Syncro in Germany for the fuel tank, trunk panel and center tunnel. This is over $4,000 so far, the shipping is killer.

    Here are the parts I have so far. I don’t have a garage or shop (yet) so this will be a long project. I have to learn how to weld too. I’ll post updates as I go, this will be the build thread. When I’m finished with the Syncro conversion I’ll start another build thread for the 9A 2.0 16V G60 that I’ll do next. I want, in the end, an all wheel drive Jetta with about 300hp from the 16V with G60 supercharger.

    IMG_3357.jpg

    IMG_3356.jpg IMG_3359.jpg

    Golf_Syncro_Hinten_Halter_Achsaufnahme.jpg

    61357.jpg

    11655319_409728269229304_80436293_n.jpg

    #11021
    Chris S
    Moderator

    The center propshaft is the same, its the 2 ends which are shortened!

    #11022

    Thank you, I have been misinformed but not to worry, I have all three from the red Golf Syncro also.

    #11027

    That front bar/cross member, can it be unbolted and removed?

    dscf0490.jpg

    #11028
    Housey
    Participant

    yes. two 15mm bolts holdt it up

    #11029

    Thanks so much.

    #11093

    I acquired a Golf Syncro carpet for $200.

    12006057.jpg

    #11119

    I got my Syncro dash badge from Germany today.

    #11150

    It took about a year but I finally have the Jetta Syncro boot.

    JS14.jpg

    #21297
    Superman
    Participant

    Hello all, the Jetta Syncro that I sourced the bits from is VIN code WVWZZZ1GZLW142956. How do I know the year and month of production?

    #21299
    LD50
    Keymaster

    is this any use?

    http://www.clubvw.org.au/vwvin

    My website | My Youtube channel (both mostly bike related)

    #21406
    Superman
    Participant

    That did get me the year of production, 1990, thanks.

    Jetta GTX 16V Syncro was my name on the old forum, this is my car.

Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.

V2 of the vwsyncro.co.uk forums

banner for shortlands vehicle recovery and repairs, baskingstoke and M3 area
Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)