holmes

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 179 total)
  • Author
    Posts
  • in reply to: suspension #4577
    holmes
    Member

    is the front springs on a rally the same as the syncro ie if i ordered a rallye spring kit for front and rear, would they fit on my syncro? regards

    in reply to: 2.0l and 1.8l engine forsale #4531
    holmes
    Member

    BUMP offers taken on anything.

    in reply to: 2.0l and 1.8l engine forsale #4513
    holmes
    Member

    all parts still forsale guys any offers considered it all needs to go asap

    in reply to: vw golf syncro forsale #4512
    holmes
    Member

    still for sale guys open to offers. must go asap

    in reply to: 2.0l and 1.8l engine forsale #4459
    holmes
    Member

    p.s the bits are in chichester regards

    in reply to: transfer box #4399
    holmes
    Member

    if you still need one i have one. regards

    in reply to: Rear Crossmember and bits for sale #4398
    holmes
    Member

    i also have a rear beam sandblasted and hamerited fitted with powerflex bushes and rear trailing arms and a cleaned and hamerited rear diff and vc unit. and also a 2.0l mk 3 gti engine.

    in reply to: Rear Crossmember and bits for sale #4397
    holmes
    Member

    i have front driveshafts available but will need removing if you want them.

    in reply to: Syncro system not working – what to try? #4396
    holmes
    Member

    i have a spare vc unit plus aload of other bits forsale i don’t know how much it’s worth however it is still attached to the diff at the moe and i have no time to remove it. if you fancy going the whole hog then i have a rear beam sandblasted and hamerited fitted with powerflex bushes and rear arms and the diff and vc unit have been cleaned and hamerited i can send pics if you wish.

    in reply to: everything up for grabs #4046
    holmes
    Member

    have you got lowering springs for this vehicle and a rallye arb and some g60 steel wheels?

    in reply to: Transfer box #3965
    holmes
    Member

    i had a similar problem on my old syncro i bought a new transfer box but didn’t solve the problem, turned out to be the final drive in the gearbox had siezed up jaming the wheels. if it is the transfer box then you can seperate it fairly easily and iam sure plenty of guys on here have a spare for sale.

    in reply to: syncro and stuff #3893
    holmes
    Member

    no springs iam afraid £50 for the shocks + postage.regards

    in reply to: temp sensor identitys and causes. #3879
    holmes
    Member

    ill try it will probably be tommorow nightish. thanks

    in reply to: temp sensor identitys and causes. #3501
    holmes
    Member

    just another thing that i have noticed, when the car behaves badly like this the engine splutters and barely holds its revs when going along so when i press the clutch pedal in the engine rpm drops straight out and stalls, but when i start the car back up it runs fine. like there may have been an electrical fault causing it or maybe the coil it also seems to happen more i think when ive had the demisters on and stereo and lights on but this may not be the case but is an observation i have made.

    in reply to: Brake/Suspension upgrades #3873
    holmes
    Member

    ive had a word with my local factors for these springs but they don’t have a listing for a 35i passat, is there any other identification that could be used ie 4×4, engine size, year or registration,. regards.

Viewing 15 posts - 46 through 60 (of 179 total)

V2 of the vwsyncro.co.uk forums

Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)