Topic: MK2 Ball joint shift linkage FS

This topic has 5 voices and 10 replies.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
April 2, 2009 at 3:19 am #938

jman
Member

$75 plus $20 postage (to Europe)= $95 USD, or 66 UK pounds, or 72 euro.

I accept paypal.

April 3, 2009 at 9:04 am #5570

ld50
Member

They the ones from TSR? I got them on my syncro and it def made the shifting less wobbly.

April 3, 2009 at 10:49 am #5576

Chris S
Moderator

No, James fabricates himself,

atm I have him looking into the possibility of making something similar to adapt the rod change mech to shift a cable change box, something similar to this but for a Golf 2 (Syncro)

April 12, 2009 at 4:22 pm #5620

re2
Participant

these look very similar to the missinglinkz stuff too, but neater

April 12, 2009 at 4:39 pm #5621

jman
Member

And Cheaper. I have a few sets so do[]n’t be shy.

April 13, 2009 at 11:48 pm #3502

re2
Participant

im tempted but it wont be just yet. Will you be making these for a while? What other parts do you fabricate?

April 13, 2009 at 11:49 pm #5625

re2
Participant

do you have a sharper pic?

April 14, 2009 at 1:11 am #5626

jman
Member

I make shift linkage for the MK1, Adapters to fit 280 mm disks to your A1 etc. I fab ten sets then sell all before I fab more.

April 14, 2009 at 4:39 pm #5627

Hungry_Horse_1955
Member

jman,

Are these suitable for the Golf Country version, bearing in mind that the engine on these are roughly 4″ lower in the bodyshell than standard syncros? I don’t know if the linkages are the same! Anyone?

April 15, 2009 at 12:51 am #5628

Chris S
Moderator

I just looked in Etka and the part numbers are the same for the Country, so they should fit without any problems.

April 15, 2009 at 5:48 am #3327

jman
Member

Thanks Chris, They will fit.[]
Author

Posts