- This topic has 4 voices and 10 replies.
-
Posts
-
ETKA is confusing to which springs go on what and there are several choices and conflicting notes on part numbers too. Ideally Id like a set from a Country, but id take a set of syncro rear springs too at the mo
im kinda up poo street needing these springs. The only ones I can find are listed on ebay.co.uk but cross-referencing they look like they are mislisted and actually replace standard 2wd rear springs
even if im only borrowing, I desperately need a set as the Country is a daily driver
you do know that they are sold via vwclassicparts right?
a friend of mine bought all 4 new springs from vwclassic for his country
rear springs:
http://shop.volkswagen-classic-parts.de/vwcp/Golf-Caddy/Golf-2-Country/Fahrwerk/Hinterachse/Schraubenfeder-1.htmlfront springs:
http://shop.volkswagen-classic-parts.de/vwcp/Golf-Caddy/Golf-2-Country/Fahrwerk/Vorderachse/Schraubenfeder-3.htmlcheers Housey. I cant afford £200+ for springs at the mo. The codes P and Q were used for the Country rears. The Q being a bit more heavy duty. Mine are P codes with the one green mark (I cant see what my fronts are as they have been sprayed over)
On my mk2 I used springs from a 1994 passat estate which are heavy duty and will raise a little bit even after cutting them down. They can take more weight and are ideal for towing. I picked them up from a scrappy for £10!
The one on the right.
Description
left 16v GTI 10.2mm diameter rear spring
centre std Syncro 11.2mm diameter rear spring
right Passat 12mm diameter blue rear springnote the passat spring is taller by 1.5 inches, wound progressively and also 1mm thicker, these springs are all std length and are not cut.
As finished & ready to fit
- You must be logged in to reply to this topic.
