Forum Replies Created
-
AuthorPosts
-
dub fatha
Memberquote:
Originally posted by nutter4x4yeh not a problem , still not needed to be cut, the mk1 wishbones need to cut off to fit it,
http://img233.imageshack.us/img233/9862/dscf0243lb9.jpgbut i do know on ben`s he cut the rear subframe to fit inside the sills
are you sure he had to cut the rear beam so that the rear wheels were tucked inside the arches?
dub fatha
Memberstill looking.
dub fatha
Memberaahh, i see,
someone told me that its the vrs elegance that is the 4×4.dub fatha
MemberQuote:Originally posted by VegardNot sure if you find it on Skoda Octavia vrs, but I’ve seen it on Octavia Tdi 4×4.
hi there,
i have been told that the transfer box that i need will br from an octavia vrs elegance.regards
dub fathadub fatha
Memberhi there vr6will,
would your transfer box by any chance be from an octavia vrs 4×4.
if so i am definately interested.dub fatha
Memberhi there
i wanted to fit a mk2 golf front subframe so that it would be a bit more rigid, and so can run power steeringdub fatha
MemberHello mate,
do you have any more info on your mates haldex controller kit, am very interesteddub fatha
Memberhi there,
i am currently in the middle of convereting a 79 mk1 golf to a syncro with a haldex set up, which is more or less using the same parts as a mk2 syncro.
i will be using an early type golf rallye gear box, and just wanted to confirm that the transfer box that i wlll need is from a skoda octavia vrs, and the diff from an audi tt or s3.
regards
dub fathadub fatha
Memberhi there,
sorry for the late
reply.
yes it will fit mk2 golf syncro,
however the box has now need sold -
AuthorPosts