Dave20v

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Speedo for 02M in Mk2 #10920
    Dave20v
    Member

    Ok great I don’t know the first 2 variable variable of the equation
    (X) x (17/27) x (my wheel setup)

    in reply to: Speedo for 02M in Mk2 #10918
    Dave20v
    Member

    Chris I can confirm the 17/27 is for the rear diff but I’m looking for the front…

    Here is the formula for the cable x

    (teeth on transmission exciter gear) X (rear axle ratio) X (revolutions per mile of your tires)

    Not sure it would work for an 4×4 car?

    in reply to: Speedo for 02M in Mk2 #10912
    Dave20v
    Member

    Great!! Thanks a lot ! Can you find out how many teeth on the front diff?

    in reply to: Speedo for 02M in Mk2 #10900
    Dave20v
    Member

    Chris were you able to find out ?

    in reply to: Speedo for 02M in Mk2 #10898
    Dave20v
    Member

    hi chris, i finaly had a chance to get to my tranny, here is the code on it:
    02m 331 107 az91hp

    in reply to: Speedo for 02M in Mk2 #10808
    Dave20v
    Member

    Hi Chris , i’m using an 02m out of a audi tt 225, if you any body is using the cablex i would love to a have a chat with them

    in reply to: Speedo for 02M in Mk2 #10803
    Dave20v
    Member

    To make the cable x we need to find the number of tooths on the dif and the ratio to set the inside simple switch to give out the proper calculations.

    I bougth the cable x and i need these info to make mine work and i’m not sure where to find these. Can any one help out?

Viewing 7 posts - 1 through 7 (of 7 total)

V2 of the vwsyncro.co.uk forums

Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)