Tuning exhaust systems for Golf 2 Syncro or Rallye

[Vegard]

Where do we get the good stuff?

Looking for something in 2.5″ stainless…

[no such user]

LHD or RHD?

[Vegard]

quote:

---

Originally posted by Diamond Hell

LHD or RHD?

---

LHD.

[Chris S]

That makes it a lot easier.

[Chris S]

http://cgi.ebay.de/Faecherkruemmer-Manifold-VW-Rallye-Golf-G60-Syncro-4X4_W0QQitemZ250224870402

[Vegard]

What about cat-back? Going with 16vt so the downpipe will be custom.

Milltek used to have, but it’s discontinued.

Supersprint have one, but only 2″ and not stainless.

I have seen something once on eBay, some stainless German stuff.

[Chris S]

Supersprint do a cat back system.

[Vegard]

quote:

---

Originally posted by Chris S

Supersprint do a cat back system.

---

It will be to small, it’s just 2″. And it’s not stainless. Need 2.5″ to run 400 hp.

[no such user]

think there may an issue with clearance on large bore systems around the rear subframe, as seen a few of the high power 20vt’s sporting side exit exhausts, they are also dead easy to make for a g2,

[Chris S]

Yes they tend to burn the inner rear boot on the drive shaft.

[vr6will]

quote:

---

Originally posted by Vegard

Need 2.5″ to run 400 hp.

---

for that sort of power, a 3″ system will be more what you’ll want

[Vegard]

quote:

---

Originally posted by vr6will

for that sort of power, a 3″ system will be more what you’ll want

---

3″ will support approx 600 hp. and must be custom made.

re2 got a system custom made by http://www.powerflowexhausts.net/home.cfm

[Author]

Posts