› Forums › Repairs & Technical › Repairs & Technical for Golf & Passat cars › Rallye Golf brakes source
- This topic has 3 voices and 28 replies.
-
AuthorPosts
-
August 14, 2015 at 10:58 pm #11109
Chris S
ModeratorJetta GTX are you on Skype?
August 15, 2015 at 4:46 am #10976Jetta GTX 16V Syncro
Memberquote:
Originally posted by Chris S
The photo you posted is not of 191 615 425aThey are from an Mk3 Golf, the seller said they were this part number or at least I asked for that part number. I guess I made a $40 mistake.
quote:
Originally posted by Chris S
Jetta GTX are you on Skype?I had an account years ago but did not use it. I guess it may still be active. Do you need to send me something via Skype?
August 15, 2015 at 8:59 am #10978Housey
Participant191 615 425 A – Syncro Left
191 615 426 – Syncro RightDidn’t think there was a left/right configuration of these. but etka says so
August 15, 2015 at 1:50 pm #10980Chris S
ModeratorI have had both in my hands & I couldnt see any difference either.
August 15, 2015 at 11:36 pm #10981Chris S
ModeratorI dont need to send you anything via Skype, I just thought it might be easier to talk over skype?
August 21, 2015 at 7:05 am #10982Jetta GTX 16V Syncro
Memberquote:
Originally posted by Chris S
I dont need to send you anything via Skype, I just thought it might be easier to talk over skype?Sure, if you want to hear my Southern Louisiana accent, I tested my old account and it still works: superbugman
August 27, 2015 at 5:15 pm #10992Jetta GTX 16V Syncro
MemberDo this look correct?
August 28, 2015 at 12:06 pm #10998Chris S
ModeratorNope, These are the correct ones,

Please note that the mounting lugs are spaced further apart than the caliper sliders
https://spareto.com/products/bda228-carrier-brake-caliper
August 28, 2015 at 11:31 pm #11001Jetta GTX 16V Syncro
MemberOkay, thanks (again). The only reason I am trying to source used is because I want OEM VW.
August 31, 2015 at 10:41 pm #11008Jetta GTX 16V Syncro
MemberThese are my actual brakes from the Passat Syncro G60.
September 1, 2015 at 3:00 pm #11009Housey
Participanti just can’t get the rear carriers to fit in my head

did they acutally come from a passat syncro? or an FWD passat?
September 1, 2015 at 5:49 pm #11111Jetta GTX 16V Syncro
MemberI know, I am very confused about them too. The car was a Canadian 1992 Passat G60 Syncro. I guess I won’t know until I get some discs.
September 2, 2015 at 7:35 pm #11115Housey
Participantif you have the rear arms you can offer up the carriers just to see
should take about 3seconds to do so.either they’ll fit. or they wont.
my guess its the last one. they don’t look like the syncro ones at all
September 7, 2015 at 10:00 am #11117Jetta GTX 16V Syncro
MemberI will mate, when I get them in my midst, they are still enroute from Canada.
-
AuthorPosts
- You must be logged in to reply to this topic.
