Am I allowed to post a Quattro conversion ?

[nutter4x4]

As the title says, have started another project before the golf is finished, its Audi A3 Quattro with hopefully a torsen diff

[LD50]

I don’t see why not – I for one would be interested to see it 🙂

My website | My Youtube channel (both mostly bike related)

[nutter4x4]

[Chris S]

I can’t wait to see it.

[nutter4x4]

Struggling to to post pics from my phone doh

[LD50]

On my phone I found some browsers were ok and some wheren’t. Chrome seemed to work the best both on ipad and android phone

My website | My Youtube channel (both mostly bike related)

[nutter4x4]

https://www.flickr.com/photos/151827696@N07/shares/PC1B21

Attachments:

1. 

   31993701324_9ccb64921e_o.jpg
   

2. 

   32713067111_efbf64560d_o.jpg
   

[nutter4x4]

[LD50]

so what’s going on in these pics? Are you fitting a (v6?) onto a longitudinal quattro drivetrain into an a3?

• This reply was modified 7 years, 9 months ago by LD50.

My website | My Youtube channel (both mostly bike related)

[nutter4x4]

I’m at a point where I’m pretty sure it’s going to work, subframe built with steering rack in place, driveshafts fitted, tunnel in place, gear shifter cut and welded to the right length, loads of clearance for selection, now to strip it all back and finish welding it,

[nutter4x4]

Yes I am, with R32 lump with a small compressor type snail

[LD50]

nice! what model is the quattro drivetrain from? does it have the electronic torque splitting like some of the s/rs models?

My website | My Youtube channel (both mostly bike related)

[nutter4x4]

Good old 01e gearbox and s4 rear diff

• This reply was modified 7 years, 9 months ago by nutter4x4.

[LD50]

ah nice – I think that’s the one I have in my daily. Fair play fitting that into an a3!

My website | My Youtube channel (both mostly bike related)

[nutter4x4]

[Author]

Posts