4 stud to 5 stud rallye

› Forums › Repairs & Technical › Repairs & Technical for Golf & Passat cars › 4 stud to 5 stud rallye

  • This topic has 4 voices and 3 replies.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 23, 2007 at 9:12 pm #511
    brina
    Member

    hi can anyone help, i want to change the rear stud pattern from 4 stud to 5 (112pcd) stud on my rallye golf, i know on a standard golf gti it’s just a matter of swapping discs, but the rallye is 4wd with rear drive shafts, so would it still work, if so would i use mk3 gti rear discs, i don’t want to chang the front just the rear for now it’s a long story why !!!

    October 23, 2007 at 9:34 pm #3517
    no such user
    Participant

    112 pcd is Audi ? mk3 is 5x 100, you will have to change the hubs as well, the wheel bolts simply go through the disk and bolt into the hub, front hubs may press in? if they don’t I guess it’ll be mk3 vr syncro rear hubs

    October 23, 2007 at 10:10 pm #3518
    no such user
    Participant

    112*5 is Audi A6, Audi 100, Passat, Sharan and Seat Leon and Alhambra, not to mention Ford Granada and T25 and T4 Transporters….. I would have thought you’d really be looking for 100*5, which is all of the Golf4 platform cars – nice big choice of brakes there.

    November 7, 2007 at 9:17 am #3610
    stephcasscar
    Member

    There is another option. Ive gone 5 stud on my syncro 5×100 but Im sure you could get the adapters made to 5×112.

    I’ll try and dig out the invoice they were £120ish

    Syncrohubadapters.jpg

    Syncrohubadapters2.jpg

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

V2 of the vwsyncro.co.uk forums

banner for shortlands vehicle recovery and repairs, baskingstoke and M3 area
Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)