This topic has 3 voices and 12 replies.

Viewing 13 posts - 1 through 13 (of 13 total)

Author

Posts
August 23, 2009 at 1:37 pm #1075

jimmy diesel junior
Member

Hi all. am converting my syncro to 20VT and am looking for a downpipe from the manifold. the car is RHD!!! the engine code is APY. many thanks.

August 23, 2009 at 7:55 pm #6219

no such user
Participant

varous plces do them off the shelf for rallye you’ll just have to look and see if there is room

September 6, 2009 at 5:50 pm #6304

jimmy diesel junior
Member

Hi all, My syncro is rhd so the rallye one is different. Anyone have one or know where i can get one?? Cheers guys and girls

September 6, 2009 at 6:32 pm #6305

no such user
Participant

have you checked with the various vag tuners. one of them will have one on the shelf i would think

September 7, 2009 at 4:24 pm #6307

jimmy diesel junior
Member

Hi there, Yes rang around lots of places and asked on lots of forums but just drawing a blank i’m afraid, I’ll keep trying anyhow. Cheers

September 8, 2009 at 9:17 pm #6310

jimmy diesel junior
Member

Still looking, Anyone??? Cheers

September 11, 2009 at 7:27 pm #6325

solomk1
Member

ya gonna have to make it !!!!! I had to for my syncro

dale

September 13, 2009 at 3:03 pm #2018

jimmy diesel junior
Member

Hi there. You make it from stainless or mild steel?? Cheers

September 14, 2009 at 12:34 am #2495

no such user
Participant

ether will work fine

you’ll find custom exhaust places that do cat back system can be bribed to do turbo downpipes

September 14, 2009 at 8:03 pm #2636

solomk1
Member

to be honest i tried mild first but the use of different steels caused different expansion rates and caused poor sealing and cracking ,its best to go straight to stainless and its easier to fabricate….

just my experiance…dale

September 22, 2009 at 7:31 pm #6350

jimmy diesel junior
Member

Cheers lads, @dannyp, good suggestion but over here in ireland that’s definately a non runner unfortunateely but thanks for your input.

@solomk1 Cheers mate, think i’ll go the stainless route alright, what diametre did you use?? 2.5” ??

September 24, 2009 at 5:00 pm #6354

solomk1
Member

i am running a gt3071r with a 3″ outlet so kept it 3″ straight back pain in the ass to get between the floor and rack

2.5 will be fine

dale

September 27, 2009 at 8:56 pm #6372

jimmy diesel junior
Member

Cheers, many thanks for your help
Author

Posts

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.