Another Haldex question

  • This topic has 2 voices and 5 replies.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #704

    Can the transfer box from a haldex 02M box be bolted to the 02C box?

    And then work with a Haldex rear diff?

    Thanks for any info

    #4475
    nutter4x4
    Participant

    nope totally different

    #4478

    Whats different? The way it bolts on?

    Can the internals be swapped between the too?

    So what type is used on a VRS box? I guess that one could bolt straight onto the rallye box.

    Thanks for any info

    #4481
    nutter4x4
    Participant

    the way bolts on, the spline is larger, does`nt fit in the 02c diff, which means the bearings are also bigger, the oilways are in a different position,
    the skoda VRS ?

    #4484

    Yeah skoda VRS, or one from one of the 5speed haldex cars.

    Was thinking about fitting a LSD to my Syncro box, and running it like this for a while. when money and time permits, I would like to upgrade to Haldex, but keep the same box.

    #4488
    nutter4x4
    Participant

    the skoda VRS is a 6spd 02m 2wd, is this a rallye/ g60 syncro set up ??
    be careful its not just any old 5spd haldex , cos they do 02m in them too, the other is you can`t bolt the haldex transfer box to your syncro box either it doesn`t have a bolt in diff ie. you don`t have a bolt go through the cv flange in the transfer box that bolt`s to the diff,

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.

V2 of the vwsyncro.co.uk forums

banner for shortlands vehicle recovery and repairs, baskingstoke and M3 area
Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)