Engine specs:
ABF block,Tdk crank, KR p/p head, JE custom pistons, Scat 159 mm rods.
Bore 83 mm, stroke 95.5 mm, displacement 2067 ccm. Compression 8.5:1
Valvetrain: Longer (+18 mm) stainless Ferrea valves, IN 33 mm, EX 28 mm. Longer valve springs (+8 mm), alu retainers.
280/280 deg. mecanical camshafts with 11.5 mm lift. Mecanical lifters with shims from 8v VAG. Adjustable cam-gears.
Valvetrain is designed for 10000 RPM.
Custom exhaust manifold, IC and plenum inlet.
Injectors will be Siemens Deka 3105 together with the small turbo (Turbonetics T3/T04E46 a/r .63 Stage V) and some 1000 cc injectors for the bigger turbo setup (Turbonetics T3/T04E Super 60 a/r .82 Stage V).
Engine management: Autronic SMC and MSD 6A .
Others: 2x Bosch 044 fuel pumps, swirlpot, fuelcell. Dry sump (not bought yet).
The other engine on the pic above is for my daily driver, another Mk2 Syncro. It’s a 9A with p/p head and Schrick 268/268. I’ll put it in together with Passat G60 Syncro gearbox and rear diff. On this car suspension is Rallye springs on Koni Sport/Red Koni, Rallye rear swaybar, Neuspeed front swaybar, strutbars front & rear, lower front tiebar, adj. front camber bolts, poly bushings all over. Brakes are Audi S2 front calippers (Girling 60) on G60 discs and Mk4 rear calippers.
