which diff??

  • This topic has 3 voices and 4 replies.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #896
    dw069
    Member

    hi,
    I would like to change the diff on my syncro at some point to a haldex but I am unsure if all Haldex diff’s from tt’s s3’s and 4motion/r32’s have the same overall ratio? i would guess that there may be a slight difference between the tt/s3 and the 4motion/r32. Any advice would be appreciated

    thanks

    #5336
    dw069
    Member

    never mind…i have since found out that they are all the same…if anyone out there has a haldex unit they could sell, please get in touch…cheers

    #5337
    nutter4x4
    Participant

    their not all the same , ratio wise yes 17/27, but they did a GEN1 found in the mk4 and GEN11 diff which is found in the mk5 golf, which is harder to mount in a mk2 golf

    #5344
    dw069
    Member

    cheers….have found a diff of a tt so i am going on the asumption that if it is an older tt i should be sorted…you know what they say about assumptions though!!

    thanks

    #5499
    Vegard
    Member

    quote:


    Originally posted by nutter4x4

    their not all the same , ratio wise yes 17/27, but they did a GEN1 found in the mk4 and GEN11 diff which is found in the mk5 golf, which is harder to mount in a mk2 golf


    Good news, DutchBuild make kits for the new generation as well.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

V2 of the vwsyncro.co.uk forums

banner for shortlands vehicle recovery and repairs, baskingstoke and M3 area
Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)