› Forums › Repairs & Technical › Fitting Haldex to your G2 Syncro › Speedo for 02M in Mk2
- This topic has 7 voices and 24 replies.
-
AuthorPosts
-
April 26, 2015 at 11:06 pm #10899
Chris S
Moderatorwill look it up this week for you
May 2, 2015 at 2:20 am #10900Dave20v
MemberChris were you able to find out ?
May 5, 2015 at 8:54 pm #10905Chris S
ModeratorSorry, I got waylaid!
May 6, 2015 at 12:23 pm #10907Chris S
ModeratorGearbox type
6-speed man. gearb. quattroGearbox code
02M.3/DXW 02M.1/DQB1st gear 3.417
2nd gear 2.105
3rd gear 1.429
4th gear 1.088
5th gear 1.097
6th gear 0.912
Reverse 4.107May 7, 2015 at 1:58 am #10912Dave20v
MemberGreat!! Thanks a lot ! Can you find out how many teeth on the front diff?
May 8, 2015 at 10:01 pm #10916Chris S
ModeratorI think its 17/27 but not sure, ask nutter4x4
May 9, 2015 at 1:49 am #10918Dave20v
MemberChris I can confirm the 17/27 is for the rear diff but I’m looking for the front…
Here is the formula for the cable x
(teeth on transmission exciter gear) X (rear axle ratio) X (revolutions per mile of your tires)
Not sure it would work for an 4×4 car?
May 10, 2015 at 1:35 am #10919Chris S
Moderatorit should work just the same
May 10, 2015 at 4:49 am #10920Dave20v
MemberOk great I don’t know the first 2 variable variable of the equation
(X) x (17/27) x (my wheel setup)May 11, 2015 at 12:45 pm #10921Chris S
Moderatorhttp://www.scirocco.org/gears/
for the transmission exciter gear just take it out of the box & count the teeth!
some info here
http://forums.vwvortex.com/showthread.php?7103793-FS-VW-AUDI-02M-5-Speed-FWD-with-DXW-gear-set
-
AuthorPosts
- You must be logged in to reply to this topic.
