› Forums › Buy & Sell › Parts (& cars) wanted › Passat syncro rear arb bushes
As title,I’m in need of inner bushes to fit 25mm rear arb from a passat syncro.
Any help much appreciated.
I have checked & there are no longer any left here either
http://www.volkswagen-classic-parts.de/bestand/index_e.html
Yea iv tried a lot of places.
Even if I can borrow one from someone I can get them remoulded in poly
Or a good used one will do.
The outer rubber bushes P/N 357511437A are available – as are the outer brackets P/N 357511433 – & even the inner brackets P/N 357511417
its only the inner rubbers which are nla []
Yea I have everything I need to fit to my rallye only needing inner bushes.
You could ask rallye ronan as I got him a complete 25mm kit sometime in 2008 when they were still available from the dealers over here & I dont know whether he got around to fitting it.
Having looked, I see that he has not been on site since 2009 but you never know it just may be worth shouting him
.
PFF66-102-19, Saab 9000 85-98
ppl are fitting these saab powerflex bushes.
just incase ppl cant get get any.
http://www.ebay.de/itm/POWERFLEX-SAAB-9000-ANTI-ROLL-BAR-BUSH-PFF66-102-19-/220834089454
Says that these are 19mm bore while we want 25mm bore prothane or 23mm bore rubber.
I have found some AUDI inner rubber bushes for a 25mm dia ARB Part number is 893 411 327E
But I don’t know if the outside is the same pattern as the correct bush
I have just ordered 2 of these from the dealer 2D0 411 041B they are 23mm diameter to fit a 25mm bar will post photo early next week when they have arrived.
btw They are from the 25mm front roll bar on the 1997 to 2007 LT 28, 35, & 46 []
you should be able to get a pair from your VW dealer for less than a fiver or so []
Thanks chris, after you post up a pic ill decide which to go for.
Sorry about the delay, But due to my illness & the weather,
I havn’t been able to collect these bushes from the dealers this week,
so the dealer is dropping them here for me on Monday! Big thanks to Iede the Partsman!
Just had a look at these on google images,they look the job,have you a number for the brackets to suit them.
Why didn’t I think of that?
btw This page has to be worth a look.
http://www.yttotomotiv.com/urunler.php?grup=27&marka=47
Here as promised are the photos, but I may have something better later in the week, just watch this space!
Here is the later item, its a far heavier duty part!