syncro_16vi have bought a 16v converted syncro.
in process of removing rock hard 100mm too low coilovers..
i have a aquired a free set of ralye springs and dampers..
fronts on ok, but rears seem to have a ring or clip missing from damper tube.as shock tube rises up into boot when you press rear of car down.
someone told me that mk1 rear shocks would fit ok?
please help.
Trev16vWelcome to the forum.
Any chance of you posting details and pictures of the exhaust manifold / downpipe that has been used to fit the 16V into the Syncro chassis on your car?
syncro_16vwill do, just in process of sorting it out
runs hot and does not go like a 16v should!
Trev16vI’m interested because I intend to fit my 16V G60 engine I’ve recently built into my G60 Syncro once it comes out of the body shop, so I’m looking at ideas for exhaust manifolds.
Look forward to seeing more about your car.
Trev
Chris SFor info on fitting Golf 1 and other rear shocks see here
http://www.vwsyncro.co.uk/data/forums/topic.asp?ARCHIVE=true&TOPIC_ID=950&SearchTerms=rear+shocks
Chris SAs for the missing clip/ring you are missing either or both of
p/n 8D0 512 097 snap ring
p/n 191 512 119 ring
It should cost about one pound fifty for both of these from the dealer, or you could try the scrappy
syncro_16vthanks for the info……will order today
syncro_16vput the spacers and ring clips i ordered from vw.
will test drive over weekend.
looks ok at back, a little high on front.