engine mount bracket

› Forums › Buy & Sell › Parts (& cars) wanted › engine mount bracket

  • This topic has 3 voices and 5 replies.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 19, 2009 at 5:19 pm #1069
    mdbrayuk
    Member

    Hi all

    Would anyone have a rear engine mount bracket, the alloy one down by o/s drive shaft, my car seems to have a standard golf one and has shredded the boot.

    Cheers

    Matt

    August 19, 2009 at 7:00 pm #6191
    Chris S
    Moderator

    If you have 90mm Joints/boots? just remove the offending mounting bolt and it will be ok, my first Syncro ran for years like that!

    August 19, 2009 at 8:05 pm #6193
    mdbrayuk
    Member

    Thanks Chris, I was told this and it is most likely what will happen, just thought I would post something to see if I could find correct bracket.

    August 19, 2009 at 10:21 pm #6195
    Chris S
    Moderator

    VW dont have them any longer either, as it was ‘dropped without replacement on 01-07-2008’

    August 22, 2009 at 8:42 am #6207
    mdbrayuk
    Member

    I found that out when I went o see them the other day. Its going back together today so will have to be the bolt missing option for now. Ive got a spare standard one so may just cut it and tig it back up at some point. Thanks for your help.

    Matt

    August 22, 2009 at 11:11 pm #6210
    no such user
    Participant

    i’v probaly got a few syncro rear engine mounts somewhere

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.

V2 of the vwsyncro.co.uk forums

banner for shortlands vehicle recovery and repairs, baskingstoke and M3 area
Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)