This topic has 2 voices and 2 replies.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
June 15, 2010 at 2:16 pm #1314

kenneally_mark
Member

Hi Im going doing a 20v conversion in a while into my Syncro.

What drive shafts will I need. I want to see more than 350 break from the 20v Engine, just to give ye an idea of whats going on.

I doubt I can use the standard ones can I?

Thanks

June 15, 2010 at 2:17 pm #7381

kenneally_mark
Member

Sorry my car is a Mkii Golf forgot to mention that as well.

June 15, 2010 at 6:24 pm #7382

Chris S
Moderator

The drive shafts will hold that without any problems, its the reliability of the transfer box that is the problem.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.