This topic has 6 voices and 52 replies.

Viewing 15 posts - 1 through 15 (of 53 total)

1 2 3 4 →

Author

Posts
September 15, 2010 at 4:21 pm #1387

vrt
Participant

I have had this project in the works for a while and have collected most if not all the parts to covert the rear end to a syncro/haldex system.
the list is as follows
02m tranny
DSS front custom axles
peloquin diff
TT diveshaft
rear passat syncro system moded for haldex
haldex unit
moded rear axles
Syncro boot
golf syncro tank

I will post pics of the parts that I have started to work on.
By the end of the Month I will have the rear floor cut out to fit the new section.

September 15, 2010 at 4:31 pm #7739

vrt
Participant

September 15, 2010 at 4:34 pm #7740

vrt
Participant

some parts I need to have custom made like the bushings for the passat rear beam as well as the fuel pump.

I will try to answer any question that you may have.
The main thread with most of the work and progress is on the Corrado forum
http://www.corrado-club.ca/forum/viewtopic.php?t=12795&postdays=0&postorder=asc&start=0%5D

September 15, 2010 at 9:15 pm #7742

Chris S
Moderator

Did you get the that floor from Jman in Portland Oregon?

September 15, 2010 at 9:35 pm #7743

vrt
Participant

Yes I did. Why did you sell it to him?

September 16, 2010 at 6:57 am #7745

Chris S
Moderator

Yes, I shipped it over to him last year. []

September 21, 2010 at 4:34 am #7767

vrt
Participant

May I ask – what was to cost to ship the floor to the US?

September 21, 2010 at 4:37 am #7768

vrt
Participant

For the tranny I had a diff installed and modified the shifter forks

September 21, 2010 at 4:39 am #7769

vrt
Participant

Also had a shifter housing shipped to me from UK that will work with the 6 speed mk4 internals but still for a mk2/3 frame

September 21, 2010 at 8:31 am #7770

Chris S
Moderator

quote:

Originally posted by vrt

May I ask – what was to cost to ship the floor to the US?

I dont know exactly, as it went as part of a shipment I made to James

but I can tell you it wasn’t cheap [:0]

September 22, 2010 at 11:52 pm #7774

vrt
Participant

e brake cables arrived

November 12, 2010 at 7:27 pm #7896

vrt
Participant

Been waiting for the welder to cut the floor out and place the new section in

November 26, 2010 at 11:08 pm #7953

Vegard
Member

quote:

Originally posted by vrt

Also had a shifter housing shipped to me from UK that will work with the 6 speed mk4 internals but still for a mk2/3 frame

Do you have a part# for this one? It would solve a problem for me…

November 27, 2010 at 12:45 am #7955

vrt
Participant

you got info []

December 4, 2010 at 2:53 pm #7997

vrt
Participant

the car has been at the shop for 1 month now and still no work. I guess they want to start on it when the snow hits and things get slow. Since this job isnt a quick one.
Author

Posts