a4 / passat 1.8t engine mounts

› Forums › Buy & Sell › Parts (& cars) wanted › a4 / passat 1.8t engine mounts

  • This topic has 2 voices and 7 replies.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 25, 2011 at 10:14 am #1581
    nutter4x4
    Participant

    hi after some mounts that bolt directly to the block, either a4 or passat but must suited to 1.8t block or similar

    cheers

    December 30, 2011 at 5:50 pm #8981
    nutter4x4
    Participant

    anyone ? also after 20vt DBW engine loom

    January 3, 2012 at 9:52 pm #8990
    jofg60
    Participant

    ive got an aum/auq dbw loom. just engine part.

    January 5, 2012 at 7:20 am #8992
    nutter4x4
    Participant

    not back to the fuse box ?

    January 28, 2012 at 8:26 am #9036
    nutter4x4
    Participant

    mounts have been sourced now,

    February 1, 2012 at 10:01 pm #9041
    jofg60
    Participant

    20v loom plugs into car loom in top of scuttle area, drivers side. not been cut.

    February 4, 2012 at 7:25 am #9043
    nutter4x4
    Participant

    sounding good so far, sorry for the Q`s which car and year and how much would like ?

    February 10, 2012 at 9:12 pm #9062
    jofg60
    Participant

    no probs. its a 2001 aum/aug loom

    £65 delivered ?

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.

V2 of the vwsyncro.co.uk forums

banner for shortlands vehicle recovery and repairs, baskingstoke and M3 area
Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)