This topic has 2 voices and 10 replies.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
May 21, 2014 at 8:10 pm #1875

Thomas Cahill
Participant

Hi all just looking for a front section box part number 191 253 209C or 191 119K I cant get one over here in Dublin it must be in useable order,
Mine has a split in the front .contact Thomas 353(0)863203403 my syncro is right hand drive engine code gu. Or pm thank in advance.

May 21, 2014 at 9:56 pm #10678

Chris S
Moderator

Here you go, a brand new one for not much money!

http://www.ebay.de/itm/like/251501991658?clk_rvr_id=637066257694&item=251501991658&lgeo=1&vectorid=229487

103 euros including postage []

May 21, 2014 at 10:00 pm #10679

Chris S
Moderator

Here is another at almost the same price.

http://www.ebay.de/itm/like/400432387130?clk_rvr_id=637066966959&item=400432387130&lgeo=1&vectorid=229487

May 21, 2014 at 11:24 pm #10680

Thomas Cahill
Participant

Thanks Chris how can I get one I can’t do eBay route I can’t even change the settings to english.

May 22, 2014 at 12:22 am #10681

Chris S
Moderator

No problems, I can sort it for you!

I can get it sent here & then on to you or hopefully direct to you!

please let me know what you would like to do?

May 22, 2014 at 7:26 am #10682

Thomas Cahill
Participant

Yes please if you could Chris that would be a great help just let me know how much it will cost and I will send it to you thanks again []

May 28, 2014 at 11:01 pm #10720

Chris S
Moderator

Sorted & in the post(Direct)to you!

June 3, 2014 at 6:49 pm #10723

Thomas Cahill
Participant

Thanks for your help again front exhaust arrived this morning I fitted it today before the rain a happy man again in my syncro thanks Chris.[]

June 3, 2014 at 8:50 pm #10724

Chris S
Moderator

Exellent!

June 3, 2014 at 9:28 pm #10725

Thomas Cahill
Participant

Chris just to let you know the stud bolt to fix the front exhaust I got are no longer able to get from the dealers here pt number n100 287 02 but I sorted it with nut and bolt with washers , on another note can I use the front section I have because I am not going to have a cat on my g60 syncro.

June 4, 2014 at 10:45 am #10726

Chris S
Moderator

No, if you are using the G60 Syncro manifold & downpipe, then the non G60 front box will not fit.

As for the studs you can use either 8mm stud bar or VW stud p/n N 0445113 would probably work just as well.

the Gasket is available from http://www.volkswagen-classicparts.de/bestand/
Author

Posts

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.