fitting an audi s3 haldex gearbox to an ABF engine

Forums Repairs & Technical Fitting Haldex to your G2 Syncro fitting an audi s3 haldex gearbox to an ABF engine

  • This topic has 2 voices and 2 replies.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1266
    ezzoG60
    Member

    hi guys,can anyone tell me if the gearbox of an audi s3 (210hp) fit directly to an ABF engine?can i use the ABF clutch and flywheel or i have to change them?thank you very much!
    another question,do i have to use the cable shifter from an audi s3 or i can use the g60 cable box?thank you!

    #7080
    mk1 Haldex
    Member

    Yes the S3 gearbox will bolt up to the ABF block. (done so myself)
    You will not be able to use the flywheel/clutch from the ABF.

    You will need the dual mass set up or buy an after market solid flywheel.(done this also)

    The ends on the cable shifters are different so would be much easier to change to the MK4 golf, S3 and any other model shifter that come with the o2m boxes.

    [:D]

    #7112
    ezzoG60
    Member

    thank you very much for your reply!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

V2 of the vwsyncro.co.uk forums

banner for shortlands vehicle recovery and repairs, baskingstoke and M3 area
Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)